Our client had a very small back yard and access was very limited. He decided on the Jazz 700 Plunge Pool and Spa with gas heating and Acquatherepe mineral salts  – Astral Pool  E25 Salt  Chlorinator. For delivery we had to close off the street for 2 hours and crane lift over the home to place in position – lift over 60 metres. Our client’s budget was around the $24000.00 mark and was completed under budget. Photos of lift in the early morning and the completed project. If you have any questions in relation to this job please call us.

  Crane lift over home

  Jazz 700 Plunge Pool and Spa

  Jazz 700 Plunge Pool and Spa

Spa City Spas arranged for the Council Permit and install carried out by one of our installation teams. Our client arranged a small digger to dig hole the side access was only 900 mm down along the side of the house. The pool just looks great and our client is very happy with the finish project.

Call Spa City Spas for a quote – Michael on 0418 533 902

Onga 4352 spa pool pump with heater is no longer available now. This pump was very with different Manufacturers of Portable Spa Pools. The only replacement pump now for this is the Waterco Portapac – this unit we have in stock. Spa City have been supplying them to interstate clients and as well as local.  Delivery available to Australia Wide. The Portapac comes in 2 sizes – a 10 Amp and a 15 Amp unit. Heater size is the only difference. This will operate by a air button and will look after a spa size of up to around 1500 Litres.

The Portapac is now available *Special –  $925.00 includes gst. Can be posted  Interstate.

You may call for further information  – Spa City – Best Prices in Town.      

It can be hard to find someone to remove your old spa pool gas heater and re-plumb with a new Astral Pool HX 120 Nat or LPG spa heater. We just finish one job this morning. Spa City Spas removed the old spa heater and rusted base and re plumbed the total system to suit the new Astral Pool HX 120 unit. I have included some old photo before and after shots, these may be on interest to some that have similar situation. The first photo shows the old spa heater this unit is about 20 years old. The next is the finish job showing how we re plumbed all pipe work and made it more well clean looking with the pipe work now at the back of the units and the old rusted steel base gone.

Also we supplied a new Duel Air switch time clock which you can see on the back wall.

There are a lot of portable spas on offer from all sorts of avenues, like one spa shop advertising on TV with offers of up to 40% off.  Our reports from people that have come into our Showroom after visiting this store found it very disappointing to find that their prices where still higher than ours. You will need to shop around and check your prices before putting money on a product thinking that you are saving lots when in fact your not. Those that search will find as the saying goes. There now are only three main Manufacturers in Australia making portable spa pools. These are all in Melbourne and we deal with 2 of them. You will find as you go shopping some spa shops will tell you that they are made here – ask them who is the manufacturer. The 3 main Manufacturers are – Impact Bathroom Industries, Sapphire Spas and Spa Industries which are now owned by Chinese interests – this range is normally sold through the Just Spas dealers. If they are not any of the above then they will be from Overseas and NOT Australian Made and in some cases not Australian approved.

All Australian Made spas are certified to the Australian Standards. They will be most likely using Australian Spa Equipment and Spa Hard covers will be made here but not in all cases.

If in doubt you can call us on our Mobile for free advise in this area before you buy. We have a large range available to choose from and our prices are the BEST in Town!

Take this spa for an example – this Portable Spa we sell for $5500.00 including gst. New price soon will be $5700.00 from Feb 2016. It is made here in Melbourne – is Australian Approved and Certified – we use an Australian Company for all the spa jets and fitting – Edgetec Systems these are the only Australian company now to still be manufacturing jets in Australia today, head rest are made here,we use Davey Pumps and equipment they are here in Rowville – Australian Company,the spa hardcover is also by a Australian Company here in Bayswater , Cedar cabinet timber by Tillings, the spa is Manufactured and Produced in Kilsyth  only 19 minutes away from our Showroom.

The Seaview 15/20 Model is our most popular unit and we have been delivery them to local clients and both  Interstate and to Country Clients for some years now. Comes complete with 2 speed pump digital touch pad, stainless jets headrests grab rails spa hard cover cedar cabinet. Unit shown is in Ocean Wave comes with a Slate hardcover [black]

Over the past few months there has been a huge increase in our inquiries for the Plunge pool and spa both the Jazz 700 and Jazz 750. Both as a stand alone unit and as in ground installation.

The most popular way of  heating  operation is by the Astral Pool Spa & Pool gas heater being the HX 120 or the HiNRG 175  this being a little more expensive. Gas heating will enable all year use of your pool at a reasonable cost.  Our current Special say for the Jazz 700 Plunge Pool Spa with the following equipment supplied loose – Hx 12o Pool Heater, 1.5 Hp high performance pump, ZX Series cartridge filter 100 sf,Duel air switch control with time clock, Salt Chlorinator,LED light and transformer and Hardcover you will be looking at under $16000.00 including GST. If you would like the Swim Jets and Swim Pumps add $4000.00 to your budget.

Others costs to consider are the following – these are estimates only and gives you an idea of budget costs you should allow for – Council Permits $1400.00. Digging hole,concrete slab,installation and connection of spa and pool equipment $6000.00. Gas connection $1000.00. Electrical $700.00. Pool fencing – Glass varies from 2000.00 to 5000.00 depends on the length and then you need to allow for Landscaping.

You will need around $25000.00 to $30000.00 for a budget. Some of our Clients have carried out the above work themselves and come out around the $20000.00.

Jazz 700 Williamstown  budget was $24000.00 – crane lift was needed for this with a street closure required

Jazz 700 Willianstown Plunge pool Spa – Owner/builder

Jazz 750 Doreen  finish cost was around $28000.00 Owner/builder

Jazz 700 Doreen this project our client finished his job for  under $20000.00 Owner/builder

You can also do these models as a Stand alone Pool and Spa.